Spine, lying soldier, spring breakers, this speed reduction device, existing on streets and avenues, goes by several names, but the important thing is that you know that you can damage your vehicle if you don’t drive over it properly.
One of the most common habits among drivers, when visualizing a speed bump such as speed bumps El Paso for example or even a very deep depression in the ground, is to drive the car diagonally, passing one wheel at a time.
Almost no one knows that this habit of driving diagonally through urban obstacles ends up causing the vehicle’s body to twist. This can be so harmful as to cause some solder points to break, which makes the car noises difficult to recognize the origin. When it gets to that point, both the car’s outside and inside suffer from torsion.
In these cases, it is highly recommended that you go over the speed bump straightforwardly. For people who have lowered cars, it is better to scrape the bottom of the car than to go sideways on the speed bump; the damage will be less.
Nowadays, technology has developed so that cars have much more efficient damping systems, which sometimes hide small irregularities and anomalies in the bodywork. However, the wear is just transferred from the place, causing the suspension, shock absorbers, springs, and the whole system to end up being damaged, reducing the car’s life and causing a big financial problem for you.
Noises and noises difficult to diagnose, doors and trunk with gaps, dashboard and other plastic parts with small cracks, a lot of internal vibration, and greater wear of tires and brakes can be possible problems with unevenness in the body of your car.
You need to remember that the small act of navigating obstacles with the car on its side may not be a good idea. Keep the car straight and slow down when you see a speed bump approaching.